Eco-Friendly Small Natural Jute Drawstring

Jute drawstring bag, made to order

Drawstring bag, made to your specification rather than pulled from a stock list. The body is cut and sewn in our own workshop in Cangnan, so the pattern carries your dimensions, your colour and your closure instead of a catalogue default. Reference DR-PT0001. Zips are stitched through a tape that is wider than the teeth, so the seam does not pucker and the pull runs without catching at the curve.

Material and construction

Jute is a bast fibre with a visible, slightly hairy weave and a natural tan tone. It is the most recognisable of the low-impact options and it photographs well, which is why retail buyers use it for seasonal and gift ranges.

The open weave takes large printed blocks better than small type, so we recommend artwork with generous shapes. An inner lamination keeps fine dust out of the bag and stops it marking pale contents.

Panels are cut on the grain and matched before sewing, so the weave runs the same way across the front, the gusset and the base instead of twisting at the corner.

Printing and branding

The print method follows the fibre, not the other way round: some marks that hold on canvas will not survive on a coated film, and some films take colour that cloth cannot. Screen print handles the solid block, heat transfer the fine line, embroidery the label; a woven side tag can go in at the same time.

Placement is usually centred on the front face. The print position, the size in millimetres and the colour reference are confirmed in writing before production, and a mockup of the artwork on the actual shape is sent for approval. Artwork is best sent as vector; where only a photograph exists we redraw the mark and return it for approval.

Size, colour and small changes

Sizes are made to your dimensions rather than picked from a list. If you have the object the bag has to hold, send its measurements and we will work out the allowance; if you have a drawing already, we cut to it. A pre-production sample is made from the agreed specification before anything is cut for bulk.

A taller body, a wider base, a shorter handle or a different closure is a pattern change rather than a new product, so it is quoted as a variation. Anything that alters the pattern is quoted as a variation on this shape rather than as a new product.

Packing, checks and shipping

Every order is inspected in line and again before packing, against the approved sample: print position, colour, stitch density, hardware function and measurement. Artwork is best sent as vector; where only a photograph exists we redraw the mark and return it for approval.

Goods ship from Ningbo, Shanghai or Shenzhen, by sea, air or rail depending on the date you need them, and we quote the options rather than assume one. Where a launch date is fixed, we work back from it to the booking date and confirm both in writing.

Frequently asked questions

Q1: Can our logo be printed on this drawstring pouch?

A1: Yes. On jute we normally use screen printing, which holds thin lines and small type well. Send vector artwork where you have it; where you only have a photo, we redraw the mark and return it for approval.

Q2: What is this drawstring pouch made of, and how does it wear?

A2: This one is jute. We pick the weight to match the job the drawstring pouch has to do, so a pouch that carries cosmetics is not built like one that carries groceries.

Q3: Can we change the size, colour or add a pocket?

A3: Yes. Sizes and colours are open, and small construction changes such as an inside pocket, a longer handle or a lining are quoted from your drawing. Anything that changes the pattern is re-sampled first.

Q4: How long does a sample take?

A4: A printed sample usually takes three to seven working days after artwork approval, and it ships by courier with tracking. The sample cost is credited against the production run.