Custom High Quality Jute Drawstring Gift

Jute drawstring bag, made to order

Drawstring bag, made to your specification rather than pulled from a stock list. The body is cut and sewn in our own workshop in Cangnan, so the pattern carries your dimensions, your colour and your closure instead of a catalogue default. Reference DR-PT0002. Edges are folded and stitched rather than cut raw, and the base is reinforced where the load sits, which is the difference between a bag that lasts a season and one that lasts a year.

Material and construction

Jute is a bast fibre with a visible, slightly hairy weave and a natural tan tone. It is the most recognisable of the low-impact options and it photographs well, which is why retail buyers use it for seasonal and gift ranges.

The open weave takes large printed blocks better than small type, so we recommend artwork with generous shapes. An inner lamination keeps fine dust out of the bag and stops it marking pale contents.

Seams are double stitched, raw edges are enclosed, and hardware is set with a backing plate so it does not pull through under load.

Printing and branding

Most of these bags leave the floor with a one or two colour screen print, because it reads at arm's length and costs least to set up. Heat transfer suits a small logo with fine detail, digital print carries gradients and photographs, and embroidery gives a raised mark without a second component.

Placement is usually centred on the front face. The print position, the size in millimetres and the colour reference are confirmed in writing before production, and a mockup of the artwork on the actual shape is sent for approval. Any change after approval is re-sampled rather than absorbed into the run, so what is signed off is what is delivered.

Size, colour and small changes

The bag is cut to your measurements, so a size that is not on any list is not a problem. Send the packed object's dimensions and we will add the seam and closure allowance. A pre-production sample is made from the agreed specification before anything is cut for bulk.

Colour can be matched to a Pantone chip, to a fabric swatch or to a previous order, and small changes such as a longer handle, an inner pocket, a zip pull or a lining are part of the same conversation. A change to the pattern is drawn up and sent back as a dimensioned sketch before the sample is cut.

Packing, checks and shipping

Inspection is done against the signed sample, with the print position measured and the colour checked under a light box. Artwork is best sent as vector; where only a photograph exists we redraw the mark and return it for approval.

Bags are counted into export cartons with an inner poly bag for sea freight, and the carton marks are agreed before packing. Delivery is quoted to your port or door, and the incoterm is stated on the order rather than assumed.

Frequently asked questions

Q1: Can our logo be printed on this drawstring pouch?

A1: Yes. On jute we normally use screen printing, which holds thin lines and small type well. Send vector artwork where you have it; where you only have a photo, we redraw the mark and return it for approval.

Q2: What is this drawstring pouch made of, and how does it wear?

A2: This one is jute. We pick the weight to match the job the drawstring pouch has to do, so a pouch that carries cosmetics is not built like one that carries groceries.

Q3: Can we change the size, colour or add a pocket?

A3: Yes. Sizes and colours are open, and small construction changes such as an inside pocket, a longer handle or a lining are quoted from your drawing. Anything that changes the pattern is re-sampled first.

Q4: Can the bag be made in our brand colour?

A4: Yes. We match to a Pantone reference or to a physical swatch you send, and the first article is photographed against that reference so you can see the match before the run continues.